Price Match Guarantee - Protect your product with a Preferred Service Plan
Roll over image to zoom inClick on image to zoom
Pro low profile 36 inch wall ventilation hood. With standard features like heat sentry and dual setting halogen lighting, Wolf Pro wall hoods provide the ultimate in ventilation. Pro low-profile wall ventilation hoods are available in four widths and all have the classic stainless steel finish.
WOLF/SUB-ZERO/COVE Full Suite SAVINGS
Create the kitchen of your dreams and save. Offer valid January 1, 2024 through December 31, 2024.
Automatically turns the blower on or increases speed when exhaust temperature exceeds 200° F.
The left rotary switch operates the halogen
lights. There are two settings, HIGH and LOW.
The LOW setting can be used as a night-light.
From the OFF position, turn the switch to the
desired light setting, left for LOW and right for
HIGH light setting.
HEAT LAMP CONTROL
If your hood is equipped with heat lamps, a
center rotary switch will control the lamps.
Each heat lamp may function independently or
both lamps may be activated simultaneously
from the single switch. From the OFF position,
simply turn the switch to the right to activate
the right heat lamp or to the left to activate the
left lamp. When the switch is in the vertical
position, both heat lamps will be activated.
The right rotary switch that operates the
blower is variable, allowing infinite control of
the blower speed. Rotate the switch fully
counterclockwise to turn the blower off.
To remove the stainless steel filters, push each
filter up at the angle it is placed in and rotate
down. Remove the center filter first. Take out
the grease cups (if applicable) placed on the
bottom edge of the hood coinciding with the
bottom edge of the filters. Gloves should be
worn to provide the proper grip. Reinstall
using the reverse procedure as shown in the
illustration below. Outer filters may need to be
pushed over while the center filter is reinstalled.
• Vertical or horizontal
• Heavy-duty stainless steel construction
• Handfinished with hemmed edges and welded seams
• Bright halogen lighting
• Infinite speed blower control
• Heat sentry for safety
• Recessed controls for sleeker look
• 110/120 V
• 15 A
• 60 Hz
• Blower required (internal, in-line or remote blowers available)